荔湾31气田调整开发项目高完整性压力保护系统公告

荔湾3-1气田调整开发项目高完整性压力保护系统公告 基本信息
项目名称
荔湾3-1气田调整开发项目高完整性压力保护系统
工程项目名称
荔湾3-1气田调整开发项目高完整性压力保护系统
项目概况
项目所在地
广东省
资金来源
企业自筹
资金落实情况
已落实
是否允许联合体投标
否
异议投诉
异议须在机电产品招标投标电子交易平台（www.chinabidding.com)和中海油采办业务管理与交易系统上同时提出。Objections need to be proposed on www.chinabidding.com and at the same time.异议联系人：王立峰Contact Person:Wang Lifeng电话/Tel：+86 10-84527969电子信箱/Email：wanglf2@cnooc.com.cn
发布媒介
,中国海洋石油集团有限公司供应链数字化平台,中国招投标公共服务平台
标段信息
1. 荔湾3-1气田调整开发项目高完整性压力保护系统 标段
标段（包）编号
0704-2440JDCP6247/01
发标日期
2024年07月03日
主要技术规格
货物名称：高完整性压力保护系统？？？？ ？？？？？？？？？？？Name of Goods: High Integrity Pressure Protection System (HIPPS) 数量：1 套Quantity: one (1) set 主要技术规格：所用逻辑控制器形式为固态逻辑控制器，关断阀尺寸≥ 22"、压力磅级≥ 1500LB、密封形式为硬密封。Main Specifications:The logic controller used is a solid-state logic controller, with a shut down valve size of ≥ 22 ", a pressure level of ≥ 1500LB, and a hard seal. 交货期和交货地点：Delivery Schedule & Destination of delivery:？从中华人民共和国关境内提供的货物：中标通知书签发后11个月以内交货到深圳/珠海/惠州或公司其他指定的中国大陆地址。For goods offered from within PRC customs territory: Delivery to Shenzhen/Zhuhai/Huizhou or other address in Chinese Mainland designated by the Company within 11 months after NOA(Notification of Award) issued.从中华人民共和国关境外提供的货物: 中标通知书签发后11个月以内DAP公司指定的中国大陆公共码头（INCOTERMS 2010）For goods offered from outside PRC customs territory:within 11 months after NOA(Notification of Award) issued, the goods shall be DAP Chinese Mainland public wharf, P. R. of China designated by the Company, INCOTERMS 2010.
交货期/服务期/完工期
因此处字数受限，交货期要求请见“主要技术规格”栏填写内容。
交货数量
见招标文件
招标范围
见招标文件
出资比例
生产能力
资格要求
1.资格要求 Requirements for Qualification of BidderA．★营业执照：如果投标人为境内注册公司，投标人需提供合法有效的企业法人营业执照、税务登记证及组织机构代码证或证照合一的营业执照；如果投标人为境外注册公司，需提供有效的公司登记注册证明。A．★Business licence: The bidder within the customs territory shall provide valid independent legal person business license, tax registration certificate, organization code certificate, or combined certificate and business license;The bidder outside the customs territory shall provide valid certificate to prove valid business registration certificate.B．★制造商要求:所投产品为国内产品：不允许代理商投标，投标人需是逻辑控制器的制造商或取得逻辑控制器制造商唯一授权的成撬商。所投产品为境外产品：允许逻辑控制器的制造商或取得逻辑控制器制造商唯一授权的成撬商或取得逻辑控制器制造商唯一授权的代理商投标。 投标人为代理商或成撬商时，应得到本次投标逻辑控制器制造商的唯一合法授权，并需提供以下材料（盖制造商公章）：1）在有效期内的HIPPS系统关断阀制造商授权书及逻辑控制器制造商唯一授权书；2）HIPPS系统关断阀及逻辑控制器制造商承诺函，承诺投标所投产品为制造商工厂生产。B． ★ Manufacturer requirement:The bid products are domestic products： Agents are not allowed to bid, bidders must be logic solver of HIPPS’s manufacturers or the skid makers which is sole authorized by the logic solver of HIPPS’s manufacturers.The bid products are overseas products： Logic solver of HIPPS’s Manufacturers or skid makers or agents are allowed to bid.If the bidder is an agent, shall obtain the sole legal authorization of the manufacturer or the skid makers which is sole authorized by the logic solver of HIPPS’s manufacturers or the agent which is sole authorized by the logic solver of HIPPS’s manufacturers in the bid, and shall provide the following documents （stamped with the official seal of the manufacturer) :1）Authorization letter from HIPPS SDV manufacturer and unique authorization letter from logic controller manufacturer within the validity period;2）Commitment letter from the manufacturer of the HIPPS SDV and logic controller, promising that the bidding products will be produced by the manufacturer's factory.C．★质量体系认证要求:投标人所投逻辑解算器与HIPPS系统内关断阀的制造商应通过ISO9001（或GB/T19001）质量体系认证。投标人须提供制造商有效的质量体系认证证书。C．★Quality Management System Certification requirement: The manufacturer of the HIPPS SDV and logic controller shall pass Quality Management System Certification ISO9001（or GB/T19001）Certification. Bidder shall provide valid Certificate of Quality Management System Certification of manufacturer.D. ★是否接受联合体投标：否D. ★Joint Venture: Not AcceptedE.未领购招标文件是否可以参加投标:不可以E.Bid without the bidding documents：NOT Available2. 资质要求及证明文件Requirements of Qualification of Bidder and Certificate★HIPPS特种证书要求：投标人所供HIPPS系统中的阀门及配套法兰等压力管道元件制造商应取得由国家市场监督管理总局颁发的特种设备制造许可证（TS A1证书）及覆盖本次招标范围的由第三方颁发的特种设备型式试验证书,投标人应在投标时提供上述证书的扫描件。★The HIPPS special certificate requirements:The manufacturers of pressure pipeline components such as valves and matching flanges in the HIPPS system provided by the bidder shall obtain the special equipment manufacturing license (TS A1 certificate) awarded by State Administration for Market Regulation and the special equipment type test certificate covering the scope of this bidding awarded by third party,Bidders should provide scanned copies of the aforementioned certificates during the bidding process.3.★业绩要求Requirement for Bidder's reference:因此处字数受限，具体业绩要求详见“标段/包内容”栏填写内容。。
招标文件领取时间
2024年07月03日 至 2024年07月10日
招标文件领取方法
请登录的招标公告页面进行购买。首次登录必须先进行注册，注册成功后，方可购买招标文件。购买过程必须全程在线操作，线下形式的汇款将不予接受。标书费支付成功后，投标人可自行下载招标文件。