有限深圳开平114油田181区块开发项目艉输系统公告

投标邀请

   Invitation for Bids

 

招标项目名称：开平11-4油田18-1区块开发项目

Project Name: KP11-4 OIL FIELD BLOCK 18-1DEVELOPMENT PROJECT

招标编号（Bid No.）：0704-2540JDCP8652

 

中化建国际招标有限责任公司（以下称为“招标代理机构”）受中海石油深海开发有限公司（以下称为“招标人”）委托，就荔湾3-1气田调整开发项目所需部分货物及相关服务进行国际公开招标。现邀请投标人对下列货物和服务提交密封投标：

CNCCC International Tendering Co., Ltd. (hereinafter referred to as “the Tendering Agent”), entrusted by CNOOC Deepwater Development Limited (hereinafter referred to as “Tenderee”), intends to purchase the Goods and the relevant services required under KP11-4 OIL FIELD BLOCK 18-1DEVELOPMENT PROJECT by International Competitive Bidding. Bidders are kindly requested to provide the following Goods and services with sealed bids.

 

1.  招标条件

Bidding Conditions：

项目概况：开平11-4油田位于南海东部偏西海域，距香港西南约295km，开平11-4油田包含11-4区块（水深340-360米）、18-1区块（水深460-530米）。 开平11-4油田18-1区块开发项目采用“水下生产系统回接圆筒型FPSO”模式进行开发。分为1d（1d/1dSa）、2d(2d、5)两套水下生产系统分别回接至新建的圆筒型FPSO。开平11-4油田18-1区块计划2029年投产。本采办包采购的艉输系统将用于新建圆筒型浮式生产储卸油装置FPSO上。

Project Summary：The Kaiping 11-4 Oilfield is located in the west-eastern part of the South China Sea, approximately 295 kilometers southwest of Hong Kong. The Kaiping 11-4 Oilfield consists of Block 11-4 (with a water depth of 340-360 meters) and Block 18-1 (with a water depth of 460-530 meters). The development project of Block 18-1 of Kaiping 11-4 Oilfield adopts the mode of "subsea production system reconnection to cylindrical FPSO" for development. It is divided into two sets of subsea production systems, 1d (1d/1dSa) and 2d(2d, 5), which are respectively connected back to the newly-built cylindrical FPSO. The 18-1 block of Kaiping 11-4 Oilfield is planned to be put into production in 2029. The stern offloading system procured in this procurement package will be used on the new cylindrical floating production storage and offloading unit FPSO.

 

资金到位或资金来源落实情况：已落实。

Source of Funds: yes

项目已具备招标条件的说明：已具备。

Description of Prepared Bidding Conditions: yes

 

2.  招标内容：Bidding Contents:

  货物名称：艉输系统           

Name of Goods: Stern offloading system

  

数量：1套（1套原油软管绞车+1套大缆绞车+1套HPU+1快速释放脱钩及相关附件）

Quantity: one set（1 hose reel+1 hawser winch+1 HPU+1QRMH and some accessory  ）

  

主要技术规格：

艉输系统：详见技术第八章

Main Specifications:

The Inert Gas System: For details, please refer to Chapter 8 of the Technology

 

交货期和交货地点：

Delivery Schedule & Destination of delivery: 

从中华人民共和国关境内提供的货物：

中标通知书签发后16个月以内交货到青岛海工建造现场。

The goods shall be delivered to the construction site in Qingdao within 16 months after the issuance of the notice of award 

从中华人民共和国关境外提供的货物:

中标通知书签发后16个月以内DAP:公司指定的青岛港（INCOTERMS 2010）

DAP Qingdao Port (INCOTERMS 2010) within 16 months after the issuance of the Notice of award

 

3. 对投标人的资格和业绩要求：

Requirements for Qualification and reference of Bidder:

 

（1）资格要求 

Requirements for Qualification of Bidder

 

A．★如果投标人为境内注册公司，投标人需提供合法有效的企业法人营业执照、税务登记证及组织机构代码证或证照合一的营业执照，投标时需提供原件扫描件（原件备查）；

如果投标人为境外注册公司，需提供有效的公司登记注册证明；

窗体顶端

窗体底端

A．★The bidder within the customs territory shall provide valid independent legal person business license, tax registration certificate, organization code certificate, or combined certificate and business license. The scanned copy of the original shall be provided during bidding (the original copy for reference);

The bidder outside the customs territory shall provide valid certificate to prove valid business registration certificate.

B．★制造商要求:

所投产品为国内产品：投标人必须为艉输系统的制造商，不允许代理商投标。

所投产品为境外产品：允许艉输系统制造商或代理商投标。

投标人为代理商时，应得到本次投标所投艉输系统制造商的唯一合法授权，并需提供以下材料（原件加盖制造商公章）：

在有效期内的制造商授权书。

B． ★ Manufacturer requirement:

  The bid products are within PRC customs territory：Bidders shall be manufacturers of stern

Offloading system. Agents are not allowed to bid.

The bid products are outside PRC customs territory：Manufacturers or agents of stern offloading system are allowed to bid.

If the bidder is an agent, shall obtain the sole legal authorization of the manufacturers of the stern offloading system in the bid, and shall provide the following documents(original letter stamped with the official seal of the manufacturer ) :

Letter of Authority from Manufacturer within the validity period.

 

C．★是否接受联合体投标：否。

C. ★Joint Venture: Not Accepted.

 

D．★未领购招标文件是否可以参加投标:不可以。

D. ★Bid without the bidding documents：NOT Available.

 

 

（2）★业绩要求Requirement for Bidder's reference:

投标人需满足以下所有要求：

（1）投标人所投产品必须是成熟产品，自2015年7月1日至投标截止日（以合同签署时间为准），投标人应具有1个合同的艉输系统供货业绩，且提供业绩系统技术参数均满足单台设备外输量≥4000m3/h、配置储存外输软管（内径≥16”，长度≥200米）的技术要求;（2）投标人须按规定格式提交业绩表，并提交相关业绩证明文件。业绩证明文件包括：1）销售合同和2）用户签字或盖章的到货验收材料（到货验收单或调试验收报告或其他可以证明合同项下货物已经到货验收的有效证明材料）。投标人所提交的业绩证明文件必须至少体现以下内容：合同签署时间、合同签署页（国内贸易合同应有双方盖章，国际贸易合同应有双方签字或盖章）、货物名称、外输量≥4500m3/h、配置储存外输软管（内径≥16”，长度≥200米）、用户签字或盖章的到货验收材料;（3）若业绩合同为年度协议，除提供年度协议外，还应提供相应的已到货订单，订单内容或编号应与年度协议相关联。同一个年度协议下提供1个或以上的订单及与订单对应的到货验收材料均算为1个有效业绩;（4）未提交业绩证明文件，或通过所提供的业绩证明文件无法认定满足上述业绩要求的，均视为无效业绩。

 (1) The products submitted by the bidder must be mature products. From July 1, 2015 to the bid submission deadline (based on the contract signing date), the bidder should haveone supply performance records of stern transmission systems, and the technical parameters of the provided performance systems should all meet the requirements of a single equipment external transmission volume of ≥4000m 3 /h and the configuration of storage external transmission hoses (inner diameter ≥16 ").  For technical requirements (2) with a length of ≥200 meters, bidders must submit the performance table in the prescribed format and provide relevant performance certification documents.  The performance proof documents include: 1) The sales contract and 2) the arrival acceptance materials signed or sealed by the user (arrival acceptance form or commissioning acceptance report or other valid proof materials that can prove the goods under the contract have arrived and been accepted).  The performance proof documents submitted by the bidders must at least reflect the following contents:  The contract signing time, the contract signing page (domestic trade contracts should have the seals of both parties, and international trade contracts should have the signatures or seals of both parties),the name of the goods, the export volume ≥4500m 3 /h, the technical requirements for the configuration and storage of export hoses (inner diameter ≥16 ", length ≥200 meters), and the arrival acceptance materials signed or sealed by the user.  

(3) If the performance contract is an annual agreement, in addition to providing the annual agreement, the corresponding orders that have arrived should also be provided. The content or number of the orders should be associated with the annual agreement.  Under the same annual agreement, providing one or more orders and the corresponding arrival acceptance materials for the orders are all regarded as one valid performance record.  

(4) If no performance proof documents are submitted or the performance proof documents provided cannot be used to determine that the above performance requirements are met, they shall all be regarded as invalid performance. 

 

（3）★其他要求：

投标人须具备有效的GB/T19001(ISO9001)质量体系认证证书，中国国内认证机构签发的证书应可在中国国家认证认可监督管理委员会网站(http://www.cnca.gov.cn/)核实。如果有中国国家相关部门发布的最新体系标准，以最新体系标准为准。投标时需提供原件扫描件（原件备查）。

The bidder must simultaneously hold valid certificates for GB/T19001 (ISO9001) quality management system certification,. Certificates issued by the Chinese domestic certification bodies shall be verifiable on the website of the Certification and Accreditation Administration of the People's Republic of China (http://www.cnca.gov.cn/).

If there are updated system standards issued by the Chinese relevant national authorities, the latest system standards shall prevail. When submitting the bid, the bidder shall provide scanned copies of the original certificates (with the originals kept available for verification).

 

4. 有兴趣的投标人可通过以下方式获取招标文件：从2025年10月10日开始至2025年10月17日止，请登录系统(）的招标公告页面进行购买。首次登录必须先进行注册，注册成功后，方可购买招标文件。投标人须在线填写购买招标文件登记表，并在线支付标书款，支付成功后，投标人可自行下载招标文件。

本招标项目仅供正式会员查看，您的权限不能浏览详细信息,请注册本网会员并成为正式会员后可下载详细的招标公告、报名表格、项目附件和部分项目招标文件等。
联系人：王鑫
手机：18211055457
电话：010-89940160
邮箱：kefu@cgbidding.com
QQ：3492096196