渤中196气田II期开发项目天然气压缩机（旋转式）(重新招标)招标公告

第五章    投标邀请

    Section 5．Invitation for Bids

招标项目名称：渤中19-6气田II期开发项目天然气压缩机（旋转式）

Project Name: BZ19-6 CONDENSATE GAS FIELD PHASE Ⅱ DEVELOPMENT Project LOW PRESSURE GAS COMPRESSOR SKIDS

招标编号（Bid No.）：0704-2340JDCP0318

日    期：2023年3月23日

Date : 23 March, 2023

中化建国际招标有限责任公司（以下称为“招标代理机构”）受中海石油（中国）有限公司（以下称为“招标人”）委托，就渤中19-6气田II期开发项目所需部分货物及相关服务进行国际公开招标。现邀请投标人对下列货物和服务提交密封投标：

CNCCC International Tendering Co., Ltd. (hereinafter referred to as “the Tendering Agent”), entrusted by CNOOC China Limited(hereinafter referred to as “Tenderee” ), intends to purchase the Goods and the relevant services required under the project of BZ19-6 CONDENSATE GAS FIELD PHASE Ⅱ DEVELOPMENT by Internatioive Bnal Competitidding. Bidders are kindly requested to provide the following Goods and services with sealed bids.

1.  招标条件

Bidding Conditions：

项目概况：

渤中19-6气田Ⅱ期开发项目新建3座无人井口平台（BZ19-6 WHPE、BZ19-6 WHPF、BZ19-6 WHPG），并对中心处理平台BZ19-6 CEPA和滨州终端进行适应性改造。

   Project Summary：

Three unmanned wellhead platforms (BZ19-6 WHPE, BZ19-6 WHPF, and BZ19-6 WHPG) will be built for the Phase II development project of Bozhong 19-6 Gas Field, and the central processing platform BZ19-6 CEPA and Binzhou terminal will be adapted.

资金到位或资金来源落实情况：已落实。

Source of Funds: yes

项目已具备招标条件的说明：已具备。

Description of Prepared Bidding Conditions: yes

2.  招标内容：Bidding Contents:

  货物名称：天然气压缩机（旋转式）               

Name of Goods: LOW PRESSURE GAS COMPRESSOR SKIDS

数量：1台套

Quantity: 1 Set 

   主要技术规格：

   参数：排量：2450 Sm³/h(GAS)；入口:10kpaG；出口:800 kpaG

   Main Specifications:

  The Capacity is 2450 Sm³/h(GAS). INLET CONDITIONS：10kPaG；DISCHARGE CONDITIONS：800kPaG.

The flow of a single unit is 350000m³ / day, the inlet pressure is 115KPA, and the outlet pressure is 3mpaa, including interstage cooler.

交货期：2024年3月14日（国内）或2024年3月1日（进口）

    Delivery Schedule: On or before Aarch.14th, 2024(From within PRC)

               On or before Aarch.1th, 2024(From outside PRC)

从中华人民共和国关境内提供的货物：2024年3月14日前（货到项目现场时间）

For goods offered from within PRC customs territory: before Aarch.14th, 2024 (arrival date to the job site)

从中华人民共和国关境外提供的货物:2024年3月1日前（到港时间）

For goods offered from outside PRC customs territory:before Aarch.1th, 2024 (departure date on the Bill of Lading)

交货地点Destination of delivery:

从中华人民共和国关境内提供的货物：天津滨海新区买方指定地点  

For goods offered from within PRC customs territory: Tianjin

从中华人民共和国关境外提供的货物: DAP(天津港）

For goods offered from outside PRC customs territory:DAP (Tianjin port)

3. 对投标人的资格和业绩要求：

Requirements for Qualification and reference of Bidder:

（1）资格要求 

Requirements for Qualification of Bidder

A．如果投标人为境内注册公司，投标人需提供合法有效的企业法人营业执照、税务登记证及组织机构代码证或证照合一的营业执照；

如果投标人为境外注册公司，需提供有效的公司登记注册证明；

窗体顶端

窗体底端

A．The bidder within the customs territory shall provide valid independent legal person business license, tax registration certificate, organization code certificate, or combined certificate and business license;

The bidder outside the customs territory shall provide valid certificate to prove valid business registration certificate.

B．（不接受代理）

投标人应为天然气压缩机（旋转式）的制造商或其授权的成橇商。本次招标不接受代理商投标。

1）投标人以自己制造的压缩机参与投标的，不能再将此压缩机同时授权给其他投标人参与投标，相关的所有投标将被拒绝。

2）投标人作为成撬商投标的，应得到压缩机制造商的同意以及证明其在本次投标中唯一正式授权书。

3）投标人将被授权的压缩机再授权给其他投标人同时参与投标，相关的所有投标将被拒绝。

B.The Bidder shall be the manufacturer of natural gas compressor (rotary type) or its authorized skid manufacturer. Agent bidding is not accepted in this bidding.

1)If the bidder participates in the bidding with its own compressor, it cannot authorize the compressor to other bidders at the same time, and all relevant bids will be rejected.

2)If the bidder submits a bid as a skid supplier, it shall obtain the consent of the compressor manufacturer and the only formal authorization to prove that it is in this bid.

3)The bidder will authorize the authorized compressor to other bidders to participate in the bidding at the same time, and all relevant bids will be rejected.

C. 是否接受联合体投标：否

Joint Venture: Not Accepted

D.购招标文件是否可以参加投标:不可以

Bid without the bidding documents：NOT Available

E. 其它

others:

（2）资质要求及证明文件

Requirements of Qualification of Bidder and Certificate

A. 其他

others

（3）业绩要求Requirement for Bidder's reference:

1) 天然气压缩机型式为无油双螺杆压缩机或液环压缩机。

The type of Low Pressure Gas Compressor Skids should be Oil free Twin-screw type compressor or Liquid Ring compressor.

2）天然气压缩机橇需按照《海上固定平台安全规则》的要求进行设计、制造、认证和检验。制造商应委托中国国家安全生产监督管理总局海洋石油作业安全办公室（COOOSO）认可的船级社（ABS, DNV,CCS，BV）对天然气压缩机橇进行检验并获得检验证书。

The natural gas compressor skid shall be designed, manufactured, certified and inspected in accordance with the requirements of the Safety Rules for Fixed Offshore Platforms. The manufacturer shall entrust the classification society (ABS, DNV, CCS, BV) recognized by the Offshore Oil Operation Safety Office (COOOSO) of the State Administration of Work Safety of the People's Republic of China to inspect the natural gas compressor skid and obtain the inspection certificate.

3)投标人应为天然气压缩机（旋转式）的制造商或其授权的成橇商。投标人所投的天然气压缩机应为制造厂家的成熟产品，买方不接受新试制产品。天然气压缩机制造厂家应提供至少2台套（限2013年1月1日之后签订的合同，压缩机型式为液环式或无油双螺杆式，处理量≥2450Sm3/d，出口压力≥800KPaG，压缩介质为天然气或凝析气或闪蒸气）压缩机供货业绩，并提供相应的业绩证明文件（业绩证明文件指：1）合同和2）到货验收材料或调试验收报告或使用方出具的有效证明文件）。投标人所提交的业绩证明文件必须至少体现以下内容：合同签署时间、制造厂家名称、货物名称、项目名称、压缩机型式为液环式或无油双螺杆式、处理量≥2450Sm3/d、出口压力≥800KPaG、压缩介质及到货验收材料。未提交业绩证明文件，或所提供的业绩证明文件无法体现合同签署时间、制造厂家名称、货物名称、项目名称、压缩机型式、处理量≥2450Sm3/d、出口压力≥800KPaG、压缩介质及到货验收材料的，均视为无效业绩。为核实投标人业绩，在授予合同前招标人有权要求投标人进一步提供相关证明资料，包括但不限于发票、银行进账单/流水单、进出口报关单据等。投标人无法提供相关材料的，将视为无效业绩。

The Bidder shall be the manufacturer of natural gas compressor (rotary type) or its authorized skid manufacturer.The natural gas compressor offered by the Tenderer shall be the mature product of the manufacturer, and the Buyer will not accept the new trial product. The manufacturer of natural gas compressor shall provide at least two sets (limited to contracts signed after January 1, 2013, the compressor type is liquid ring type or oil-free twin-screw type, the processing capacity is ≥2450Sm³/d, the outlet pressure is≥800KPaG, and the compression medium is natural gas, condensate or flash gas) of compressor supply performance , And provide corresponding performance certification documents (performance certification documents refer to: 1) contract and 2) arrival acceptance materials or commissioning acceptance report or valid certification documents issued by the user). The performance certification documents submitted by the Tenderer must at least reflect the following contents: contract signing time, manufacturer name, goods name, project name, compressor type is liquid ring type or oil-free twin-screw type, processing capacity≥2450Sm³/d, outlet pressure ≥800KPaG, compression medium and arrival acceptance materials. Failure to submit performance certification documents, or the performance certification documents provided cannot reflect the contract signing time, manufacturer name, goods name, project name, compressor type, processing capacity ≥2450Sm³/d, outlet pressure ≥800KPaG, compression media and arrival acceptance materials, shall be deemed as invalid performance. In order to verify the performance of the Tenderer, the Tenderee has the right to require the Tenderer to further provide relevant supporting materials before awarding the contract, including but not limited to invoices, bank receipts/flow sheets, import and export customs declaration documents, etc. If the Tenderer fails to provide relevant materials, it will be deemed as invalid performance.

4. 有兴趣的投标人可通过以下方式获取招标文件：从2023年3月23日开始至2023年3月30日止，请登录系统(）的招标公告页面进行购买。首次登录必须先进行注册，注册成功后，方可购买招标文件。投标人须在线填写购买招标文件登记表，并在线支付标书款，支付成功后，投标人可自行下载招标文件。